These photocontrols install on light fixtures with ANSI C136.10 NEMA receptacles commonly found on street light fixtures. Locking type design facilitates fast installation and replacement of photocontrol. Mechanical bimetal switch with Cadmium Sulfide photocell. Integral high impact thermoplastic housing. Locking type plug for quick installation and changeover. Delay feature prevents unwanted OFF switching. Complies with ANSI C136.10 standard. Tested to 3,650 ON/OFF cycles. Input Voltage Ranges 120 VAC, 50/60 Hz Activation Off 15 fc Activation On 5 fc Application Compatibilities HID, Incandescent CA Prop 65 Message This product is in compliance with Prop65 California Proposition 65 None Color White with Gray Band Country of Origin (Intermatic) MEXICO CSA Certification cCSAus Fail Mode ON Housing Material Polypropylene Magnetic Ballast Load Ratings NO Ranges 8.3 A, 1000 VA Material Polypropylene Other Certifications and Compatibilities ANSI C136.10, Green Energy, Title 20 Photo Control Switch Type Mechanical Bimetal Photocell Type Cadmium Sulfide Photocontrol Sensor Location Side Photocontrol Style Locking type Photocontrol Type Thermal RoHS Certification N/A Sensor Time Delay 30 sec to 90 sec Switch Type SPST Tungsten Incandescent Load Ratings NO Ranges 15 A, 1800 W UL Certification cULus Usage Environments Outdoor Warranty Period 2-Year limited Operating Temperature Max (°C) 70 Operating Temperature Max (°F) 158 Operating Temperature Min (°C) -40 Operating Temperature Min (°F) -40 Product Height (in) 2.75 Product Height (mm) 69.9 Unit Carton Height (in) 3.25 Unit Carton Length (in) 3.19 Unit Carton Weight (lb) 0.2 Unit Carton Width (in) 3.19 Units Per Pallet 1244