4 SAFETY RELAY OUTPUTS EXP. SCREW TERM

This expansion safety module with relay outputs meets the requirements of level PL e/Category 4 in accordance with standard EN/ISO 13849-1 as well as the requirements of safety level SILCL3 in accordance with standard EN/IEC 62061. offers line control via dedicated test outputs, configurable filters and timers for each individual input, configurable timers for switching outputs on and off, independent control of output pairs, configurable diagnostic output signals as well as simple diagnostics via front LED signaling, configuration software and communication expansion modules. Specifications Main Range of product Preventa Safety automation Product or component type Safe relay output module device short name XPSMCM Electrical connection Screw terminal [Us] rated supply voltage 24 V - 20...20 % DC Number of outputs 4 relay Function of module Monitoring safety actuators relay output Complementary Maximum power dissipation in W 3 W Integrated connection type Not connected to backplane expansion bus Switching voltage 10 V DC Associated fuse rating 3.5 A, slow-blow Safety level Can reach category 4 EN/ISO 13849-1 Can reach PL = e EN/ISO 13849-1 Can reach SIL 3 EN/IEC 61508 SILCL 3 IEC 62061 Quality labels CE Output type Relay, 4 NO + 2 NC, volt-free Quantity per set 1 Switching time 12 ms Maximum switching voltage 400 V AC, 250 V DC Minimum switching current 20 mA Maximum switching current 6 A Number of terminal blocks 6 Local signalling 1 LED green PWR power ON 1 LED green RUN RUN (status) 1 LED red E IN internal error 1 LED red E EX external error 2 LEDs orange ADDR node address 2 LEDs green/red RELAY K1...K2 relay contact Connections - terminals 2 captive screw clamp terminals, removable terminal block 1 captive screw clamp terminals, removable terminal block Cable cross section 0.00…0.00 in² (0.2…1.5 mm²) - AWG 24...AWG 16 flexible without cable end 0.00…0.00 in² (0.2…2.5 mm²) - AWG 24...AWG 14 flexible without cable end 0.00…0.00 in² (0.25…1 mm²) - AWG 23...AWG 18 flexible with cable end, without bezel 0.00…0.00 in² (0.25…2.5 mm²) - AWG 23...AWG 14 flexible with cable end, with bezel 0.00…0.00 in² (0.25…2.5 mm²) - AWG 23...AWG 14 flexible with cable end, without bezel 0.00…0.00 in² (0.5…1.5 mm²) - AWG 20...AWG 16 flexible with cable end, with double bezel 0.00…0.00 in² (0.2…1 mm²) - AWG 24...AWG 18 solid without cable end 0.00…0.00 in² (0.2…2.5 mm²) - AWG 24...AWG 14 solid without cable end Mounting support Omega 35 mm DIN rail EN 50022 Width 0.89 in (22.5 mm) height 3.90 in (99 mm) Depth 4.51 in (114.5 mm) Net weight 0.66 lb(US) (0.3 kg)