The ABB AF116-30-11-13 is a 3-phase contactor from the AF Series, designed for various applications including motor starting, isolation, by-pass, and distribution up to 690V. It features an electronically controlled coil that offers multiple benefits over conventional alternatives, optimizing configuration and simplifying design. The AF contactor ensures distinct operation in unstable networks, securing uptime by withstanding voltage sags, dips, and surges. Its electronic system rectifies AC or DC control circuit voltage to a DC control voltage, ensuring safe and optimized operation with virtually no noise. With a wide control voltage range of 100-250V AC/DC, this contactor optimizes logistics by reducing the number of required coils to just four for the entire AF contactor range, significantly reducing inventory SKUs and administrative costs..The ABB AF116-30-11-13 is a 3-pole, non-reversing contactor with a rated operational voltage of 690V in the main circuit. It has a conventional free-air thermal current (Ith) of 160 amperes at 40°C. The full load amps for motor use at 440-480V AC (three-phase) is 96 amperes, and at 550-600V AC (three-phase) is 99 amperes. It is rated for 100 HP at 550-600V AC (UL/CSA). The control circuit voltage (Uc) is 100-250V at 50/60 Hz and DC. The contactor has 3 normally open (NO) main contacts and 1 NO and 1 NC auxiliary contact. The maximum electrical switching frequency is 300 cycles per hour for AC-1 and AC-3, and 150 cycles per hour for AC-2/AC-4. The maximum mechanical switching frequency is 300 cycles per hour. The rated insulation voltage (Ui) is 690V according to IEC 60947-4-1 and VDE 0110 (Gr. C), and 600V according to UL/CSA. The terminal type is double clamp.