The ABB DRAF16-13U is a robust, enclosed direct-on-line starter designed for controlling 3-phase asynchronous motors up to 690 V AC. This starter comes fully assembled and wired, featuring an IP66 and Type 4X plastic enclosure with double insulation for enhanced protection. It includes a green I on button and a red O off/reset button, along with four cable inlets and outlets via knockouts. The unit is equipped with a 3-pole AF16-30-10-13 contactor with a holding contact and a separate supply for UL starters, operating on 100-250V 50/60Hz AC control supply. It also includes a CB5-10 start contact block, PE and Neutral terminals, and is designed to work with a TF42 thermal overload relay (ordered separately) chosen based on the motor's nominal current..The ABB DRAF16-13U is an enclosed direct-on-line starter with a 3-pole configuration and a 1NO auxiliary contact. It operates with a 100-250 VAC/VDC coil voltage and is suitable for motors up to 7.5 kW (3 hp) at 380-400 V. The starter has a 50/60 Hz frequency rating and an amperage rating of 18 A. The enclosure is IP66 rated, providing protection against dust and water. Dimensions are 230 mm in height, 107 mm in width, and 131 mm in depth.