Frequency adjustable up to 40 kHz; short-circuitproof; 2 PWM outputs.
As a part of the new u-remote system, Weidmülleroffers a special solution for the control of small motors with current requirements of 0.5 A up to 2 A which can also be used for the control of valve flaps.
The switching frequencies are adjustable up to 40 kHz and, in addition to this, the push/pull output levels can be used for motor activation; for example: change of rotation direction.
As with all modules of the u-remote system, the characteristics are outstanding – from the modular design and the interchangeable.
Technical data:
Dimensions and weights:
Depth 76 mm (2.992 inch)
Height 120 mm ( 4.724 inch)
Width 11.5 mm ( 0.453 inch)
Mounting dimension - height 96 mm
Net weight 83 g
Temperatures:
Storage temperature -40 °C ... +85 °C
Operating temperature -20 °C ... +60 °C
Digital Inputs:
Digital Outputs:
Actuator connection Dual conductor, Triple conductor, Triple conductor + FE
Data width 2 Byte Input, 12 Byte Output
Feedback-free Yes
Individual channel diagnosis No
Max. output current per channel 2,000 mA
Max. output current per module 4,000 mA
Max. response time, high 100 ns
Max. response time, low 100 ns
Module diagnosis Yes
Number 2
Switching frequency, inductive load Statisch, 6 Hz … 40 kHz
Switching frequency, lamp load Statisch, 6 Hz … 40 kHz
Switching frequency, resistive load Statisch, 6 Hz … 40 kHz
Type DO PWM push / pull
Connection data:
Type of connection PUSH IN
Wire connection cross section, finely stranded, max. 1.5 mm²
Wire connection cross section, finely stranded, min. 0.14 mm²
Wire cross-section, finely stranded, max. (AWG) AWG 16
Wire cross-section, finely stranded, min. (AWG) AWG 26
Wire cross-section, solid, max. (AWG) AWG 16
Wire cross-section, solid, min. (AWG) AWG 26
Wire cross-section, solid, max. 1.5 mm²
Wire cross-section, solid, min. 0.14 mm²