Fieldbus coupler is the Interface between system bus and a fieldbus protocol. It is used to supply the I/O modules with power.
u-Remote is a remote I/O concept, focusing on faster installation, reduced downtime, safer start-up to provide improved performance and greater productivity.
Thanks to their narrow design and reduced power-feed module requirements, u-Remote can reduce the size of your I/O. Tool free assembly, modular design and an integrated web server speeds up installation time and status LEDs on the channel and each module gives reliable diagnosis and rapid service.
The modular structure offers flexible system design and fast installation, while ensuring reliable start-up and minimum system downtime.It can also reduce wiring mistakes and system start-up time.
An integrated web server in the coupler allows on-site or remote testing, diagnostics or the simulation of inputs and forcing of outputs.
A permanent base allows electronics to be replaced without interrupting communication or the power supply to your remote I/O system.
High-speed system bus provides up to 256 DI/DOs in 20 µs. The system has two separate 10A supply paths & an internal, high-capacity supply path for station operation. This reduces the number of power-feed modules, so just one power supply operates 64 modules on the coupler.
Technical data:
Dimensions and weights:
Depth 76 mm (2.992 inch)
Height 120 mm ( 4.724 inch)
Width 52 mm ( 2.047 inch)
Mounting dimension - height 128 mm
Net weight 227 g
Temperatures:
Storage temperature -40 °C ... +85 °C
Operating temperature -20 °C ... +60 °C
Environmental Product Compliance:
REACH SVHC Lead 7439-92-1
SCIP 98e19a7e-033b-4e68-93e3-c47b30de875e
Connection data:
Type of connection PUSH IN
Wire connection cross section, finely stranded, max. 1.5 mm²
Wire connection cross section, finely stranded, min. 0.14 mm²
Wire cross-section, finely stranded, max. (AWG) AWG 16
Wire cross-section, finely stranded, min. (AWG) AWG 26
Wire cross-section, solid, max. (AWG) AWG 16
Wire cross-section, solid, min. (AWG) AWG 26
Wire cross-section, solid, max. 1.5 mm²
Wire cross-section, solid, min. 0.14 mm²