ZDK 2.5/1.5 TERMINAL BLOCK CONNECTOR 4 POSITION FEED THROUGH BEIGE 12-30 AWG

To feed through power, signal, and data is the classical requirement in electrical engineering and panel building. The insulating material, the connection system and the design of the terminal blocks are the differentiating features. A feed-through terminal block is suitable for joining and/or connecting one or more conductors. They could have one or more connection levels that are on the same potential or insulated against one another. 4 terminals Top connection, 6kV impulse voltage, 3 deg pollution Right open side Z series terminals have a large clamping range and one or two cross-connection slots Plug-in standard cross-connections enable potentials to be distributed over any number of terminals 2.5 sq-mm flexible wires with wire-end ferrules are crimped with the Weidmuller PZ 6/5 crimping tool 0.6 mm x 3.5 mm blade size, 2.5 sq-mm rated cross-section 30 - 12 AWG rated, 26 - 14 AWG factory wiring UL, 26 - 14 AWG field wiring UL, 26 - 12 AWG CSA 500 V rated, 300 V UL/CSA, 275 V ATEX, 20A rated current 15 A UL, 25 A CSA, 18 A ATEX 50/Pack Specifications Amperage Rating 20 A Color Beige Connection Type Tension Clamp-On Top Dimensions 3.13 in H x 0.201 in W x 2.087 in D Material Wemid Mounting Type Snap-On Series ZDU Temperature Rating -50 to 120 deg C Terminal Type Feed-Through Type 2-Tier Voltage Rating 500 VAC Wire Size 30 to 12 AWG Wire Strip Length 10 mm