SIL3; OSSD outputs; wire breakage and shortcircuit detection
The safety modules of the uremote system have key features such as emergency-stop circuits and wire-breakage or short-circuit detection. They
meet all SIL 3 requirements according to IEC 62061 and EN ISO 13849-1, category 4, PL e, and support the safe operation of your system.
By safely shutting down the downstream output modules, the safety modules attain maximum safety with optimum control.
All input sensors are independently supplied via separate voltage paths and report the current machine status to the control unit.
Restarting is either carried out in manual mode or using the autostart function.
In addition, Weidmüller safety modules reduce maintenance and service times and improve response times in case of emergency – thanks to a concept of maximum transparency, e.g. using OSSD outputs.
The module electronics supply the connected actuators from the output current path (UOUT).
Dimensions and weights:
Depth 76 mm (2.992 inch)
Height 120 mm (4,724 inch)
Width 11.5 mm (0,453 inch)
Mounting dimension - height 128 mm
Net weight 90.2 g
Temperatures:
Storage temperature -40 °C ... +85 °C
Operating temperature -20 °C ... +60 °C
Operating temperature, max. 60 °C
Operating temperature, min. -20 °C
Storage temperature, max. 85 °C
Storage temperature, min. -40 °C
Environmental Product Compliance:
REACH SVHC Lead 7439-92-1
Digital Inputs:
Individual channel diagnosis Yes
Input filter configurable
Input voltage, high > 11 V
Input voltage, low < 5 V
Module diagnosis Yes
Number 4
Reverse polarity protection Yes
Sensor supply Yes
Type Types 1 and 3, EN 61131-2
Digital Outputs:
Individual channel diagnosis Yes
Module diagnosis Yes
Number 4
Type Types 1 and 3, EN 61131-2
Connection data:
Type of connection PUSH IN
Wire connection cross-section, finely stranded, min. 0.14 mm²
Wire connection cross section, finely stranded, max. 1.5 mm²
Wire cross-section, finely stranded, min. (AWG) AWG 26
Wire cross-section, finely stranded, max. (AWG) AWG 16
Wire cross-section, solid, max. (AWG) AWG 16
Wire cross-section, solid, min. (AWG) AWG 26
Wire cross-section, solid, max. 1.5 mm²
Wire cross-section, solid, min. 0.14 mm²