WEIDMULLER CONNECTOR TERMINAL BLOCK W SERIES 281-5199-ND 70M8446 470-9503350000
In some applications it is useful to protect the feed through connection with a separate fuse. Fuse terminal blocks are made up of one terminal block bottom section with a fuse insertion carrier. The fuses vary from pivoting fuse levers and pluggable fuse holders to screwable closures and flat plug-in fuses. Fuse isolator, one end without connector TS 35 mounting rail Right open sides 4 sq-mm further connection, conductor cross-section, flexible plus plastic collar DIN 46228/1 0.6 x 3.5 mm blade On side connection direction 0.33 to 4 sq-mm minimum/maximum clamping range, rated connection 0.5 to 4 sq-mm minimum/maximum rated wire connection cross-section, finely stranded with wire to end ferrules and plastic collars DIN 46228/1 A3 gauge to IEC 60947-1 2 number of connections Two torque level with DMS electric screwdriver 1 number of similar terminal G-Si 5 x 20 cartridge fuse UL 94 flammability rating V-2 1 mOhm volume-resistance according to IEC 60947-7-x 6 kV rated impulse withstand voltage 3 pollution severity KDKS 1/EN4 type Specifications Amperage Rating 10 A Color Beige/Yellow Connection Type Screw Dimensions 2.894 in H x 0.315 in W x 2.559 in D Material Polyamide 6.6 Mounting Type Snap-On Series SAK Temperature Rating -50 to 100 deg C Terminal Size 4 sq-mm Torque Rating 0.5 to 1 N-m Voltage Rating 300 VAC Wire Size 26 to 12 AWG Wire Strip Length 9 mm