KDKS 1/35 DB WEMID TERMINAL BLOCK CONNECTOR 4 POSITION DISCONNECT, FEED THROUGH BEIGE 12-22 AWG

In some applications it is useful to protect the feed through connection with a separate fuse. Fuse terminal blocks are made up of one terminal block bottom section with a fuse insertion carrier. The fuses vary from pivoting fuse levers and pluggable fuse holders to screwable closures and flat plug-in fuses. The high reliability and variety of designs of the terminal blocks with clamping yoke connections make planning easer and optimises operational safety Klippon® connect provides a proven response to a range of different requirements UL94 flammability rating - V-0 Version - screw connection, fuse isolator, one end without connector End cover plate required Two level Two clamping points per level TS 35 mounting rail 0.5 to 1.5 sq-mm twin wire end ferrules On side connection direction 6.3 A current at maximum wires 1 mohm volume resistance according to IEC 60947-7-x 6 kV rated impulse withstand voltage 3 pollution severity 2-tier Lead free M3 screw connection Specifications Amperage Rating 6.3 A Color Dark Beige Connection Type Screw Dimensions 2.894 in H x 0.315 in W x 2.189 in D Material Wemid Mounting Type Snap-On Series W Series Temperature Rating -50 to 120 deg C Terminal Size 0.6 x 3.5 mm Terminal Type Blade Torque Rating 0.5 to 0.8 N-m Type Standard Voltage Rating 500 VAC Wire Size 0.5 to 4 sq-mm Wire Strip Length 8 mm